In the changing style of clothing, various buttons can be used. The designer must design according to the style, refer to the front center line position, the highest position and the waist button position as much as possible. In the single-breasted and double-breasted styles, Pay attention to the distance of the buttonholes from the corresponding sides and the centerline in order to adjust the tightness of the clothing and to ensure that the rims remain in place.
The upper-middle-eye position is the most important. It should be marked on the same horizontal line as the base point of the refutation line.
The waist is also very important. It is often located above the waistline and below the waistline. In the connected jacket, there is only one buckle, and it is always located 2cm above the waist line to prevent the archer from arching. Most of the current styles use middle buttons, or the lowest button, and in traditional styles, narrow button suits often use high button positions. The two buckles are more convenient, and the buttonhole spacing depends on the style. Generally, the buttonhole spacing is at least 6cm and at most 1.5cm.
In styles, the distance between button and buttonhole to the corresponding side is theoretically equal or substantially equal. This is particularly suitable for narrow threshold styles, because here the button means that it is on the front midline. In fact, the buttonhole of the suit is usually very close to the spigot line, about 1~2cm, and the button is often sewed to the inside of the recumbent side, and sometimes it also moves inwards or outwards to adjust the tightness of the garment. In this way, we do not have to move the distance of the front midline.
In the style, the distance between the double row buttons from the front midline is mainly determined by the width of the threshold. This style usually has a wider barter, the New York position is lower or higher than the waist line. Double-breasted from the front midline distance, usually 6 ~ 8cm; for low-headed, low-neutral traditional style, the distance is usually 9cm, or even 10cm.
When designing buttons and buttonholes on double-breasted suit jackets, buttonholes on the button are usually marked 1-2cm away from the edge. Then, for ease of sewing, the distance from the front midline is measured on the opposite side to determine the first position. Two new lines. On the bottom cymbal, the single-breasted eye is usually closer to the mouth than the inner button, so that the bottom edge of the lower door is held in place.
Want to learn more about buttons: accessible
Microfiber Sports Towel,Custom Logo Gym Towel,Gym Towel Custom Logo,Microfiber Gym Fitness Towel
Huaian Meisiyu Textiles Co.,Ltd , https://www.comfortrobe.com